I am completely new to ELMER (using the GUI) and want to calculate the B field of a copper conductor surrounded by air in 2D.
- I drew my conducor and the sorrounding air circle in SALOME and meshed it, here you can download it: https://drive.google.com/file/d/1fnfu4x ... p=drivesdk
- Then I added the equations MgDyn2D and MgDyn2DPost
- Defined the materials copper and air
- Set a current density in the copper (body force)
- Addad an infinity boundary condition for the outer boundary
Code: Select all
Header
CHECK KEYWORDS Warn
Mesh DB "." "."
Include Path ""
Results Directory ""
End
Simulation
Max Output Level = 5
Coordinate System = Cartesian
Coordinate Mapping(3) = 1 2 3
Simulation Type = Steady state
Steady State Max Iterations = 1
Output Intervals(1) = 1
Solver Input File = case.sif
Post File = case.vtu
End
Constants
Gravity(4) = 0 -1 0 9.82
Stefan Boltzmann = 5.670374419e-08
Permittivity of Vacuum = 8.85418781e-12
Permeability of Vacuum = 1.25663706e-6
Boltzmann Constant = 1.380649e-23
Unit Charge = 1.6021766e-19
End
Body 1
Target Bodies(1) = 1
Name = "Body Property 1"
Equation = 1
Material = 1
Body Force = 1
End
Body 2
Target Bodies(1) = 2
Name = "Body Property 2"
Equation = 1
Material = 2
End
Solver 2
Equation = MgDyn2D
Procedure = "MagnetoDynamics2D" "MagnetoDynamics2D"
Variable = Potential
Exec Solver = Always
Stabilize = True
Optimize Bandwidth = True
Steady State Convergence Tolerance = 1.0e-5
Nonlinear System Convergence Tolerance = 1.0e-7
Nonlinear System Max Iterations = 20
Nonlinear System Newton After Iterations = 3
Nonlinear System Newton After Tolerance = 1.0e-3
Nonlinear System Relaxation Factor = 1
Linear System Solver = Iterative
Linear System Iterative Method = BiCGStabl
Linear System Max Iterations = 500
Linear System Convergence Tolerance = 1.0e-10
BiCGstabl polynomial degree = 2
Linear System Preconditioning = ILU0
Linear System ILUT Tolerance = 1.0e-3
Linear System Abort Not Converged = False
Linear System Residual Output = 10
Linear System Precondition Recompute = 1
End
Solver 1
Equation = MgDyn2DPost
Procedure = "MagnetoDynamics2D" "BSolver"
Discontinuous Galerkin = True
Exec Solver = Always
Stabilize = True
Optimize Bandwidth = True
Steady State Convergence Tolerance = 1.0e-5
Nonlinear System Convergence Tolerance = 1.0e-7
Nonlinear System Max Iterations = 20
Nonlinear System Newton After Iterations = 3
Nonlinear System Newton After Tolerance = 1.0e-3
Nonlinear System Relaxation Factor = 1
Linear System Solver = Iterative
Linear System Iterative Method = BiCGStab
Linear System Max Iterations = 500
Linear System Convergence Tolerance = 1.0e-10
BiCGstabl polynomial degree = 2
Linear System Preconditioning = ILU0
Linear System ILUT Tolerance = 1.0e-3
Linear System Abort Not Converged = False
Linear System Residual Output = 10
Linear System Precondition Recompute = 1
End
Equation 1
Name = "Equation 1"
Active Solvers(2) = 2 1
End
Material 1
Name = "Copper (generic)"
Density = 8960.0
Sound speed = 3810.0
Youngs modulus = 115.0e9
Heat Conductivity = 401.0
Electric Conductivity = 58e6
Relative Permeability = 0.999994
Relative Permeability = 1
Poisson ratio = 0.34
Heat expansion Coefficient = 16.5e-6
Heat Capacity = 385.0
End
Material 2
Name = "Air (room temperature)"
Sound speed = 343.0
Electric Conductivity = 0
Heat Conductivity = 0.0257
Heat expansion Coefficient = 3.43e-3
Relative Permittivity = 1.00059
Heat Capacity = 1005.0
Viscosity = 1.983e-5
Density = 1.205
Relative Permeability = 1.00000037
End
Body Force 1
Name = "BodyForce BusBar"
Current Density = 1
Calculate Potential = True
End
Boundary Condition 1
Target Boundaries(1) = 1
Name = "BoundaryCondition 1"
Infinity BC = True
End
Code: Select all
ELMER SOLVER (v 9.0) STARTED AT: 2023/12/22 13:54:19
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 9.0 (Rev: Release, Compiled: 2023-12-14)
MAIN: Running one task without MPI parallelization.
MAIN: Running with just one thread per task.
MAIN: Lua interpreter linked in.
MAIN: =============================================================
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: case.sif
LoadInputFile: Scanning input file: case.sif
LoadInputFile: Scanning only size info
LoadInputFile: First time visiting
LoadInputFile: Reading base load of sif file
LoadInputFile: Loading input file: case.sif
LoadInputFile: Reading base load of sif file
LoadInputFile: Number of BCs: 1
LoadInputFile: Number of Body Forces: 1
LoadInputFile: Number of Initial Conditions: 0
LoadInputFile: Number of Materials: 2
LoadInputFile: Number of Equations: 1
LoadInputFile: Number of Solvers: 2
LoadInputFile: Number of Bodies: 2
ListTagKeywords: Setting weight for keywords!
ListTagKeywords: No parameters width suffix: normalize by area
ListTagKeywords: Setting weight for keywords!
ListTagKeywords: No parameters width suffix: normalize by volume
ElmerAsciiMesh: Base mesh name: ./.
LoadMesh: Elapsed REAL time: 0.1000 (s)
MAIN: -------------------------------------
AddVtuOutputSolverHack: Adding ResultOutputSolver to write VTU output in file: case
OptimizeBandwidth: Initial bandwidth for mgdyn2dpost: 60150
OptimizeBandwidth: Optimized bandwidth for mgdyn2dpost: 981
OptimizeBandwidth: Initial bandwidth for mgdyn2d: 10416
OptimizeBandwidth: Optimized bandwidth for mgdyn2d: 340
MAIN: Number of timesteps to be saved: 1
MAIN:
MAIN: -------------------------------------
MAIN: Steady state iteration: 1
MAIN: -------------------------------------
MAIN:
WARNING:: BSolver: This module is obsolete! USE MagnetoDynamicsCalcFields instead
BSolver: -------------------------------------
BSolver: Computing the magnetic field density
BSolver: -------------------------------------
SolveLinearSystem: Solution trivially zero!
SolveLinearSystem: Solution trivially zero!
BSolver: Result Norm: 0.0000000000000000
MagnetoDynamics2D: ------------------------------------------------
MagnetoDynamics2D: Solving equation for magnetic vector potential
MagnetoDynamics2D: ------------------------------------------------
10 0.5103E+00 0.5103E+00
20 0.4186E-01 0.4186E-01
30 0.4380E-02 0.4380E-02
40 0.7034E-05 0.7034E-05
50 0.2891E-07 0.2891E-07
BiCGStabl: 57 0.9459E-10 0.9459E-10
ComputeChange: NS (ITER=1) (NRM,RELC): ( 0.11982764E-07 2.0000000 ) :: mgdyn2d
ComputeChange: NS (ITER=2) (NRM,RELC): ( 0.11982764E-07 0.0000000 ) :: mgdyn2d
ComputeChange: SS (ITER=1) (NRM,RELC): ( 0.11982764E-07 2.0000000 ) :: mgdyn2d
ResultOutputSolver: -------------------------------------
ResultOutputSolver: Saving with prefix: case
ResultOutputSolver: Creating list for saving - if not present
CreateListForSaving: Field Variables for Saving
ResultOutputSolver: Saving in unstructured VTK XML (.vtu) format
VtuOutputSolver: Saving results in VTK XML format with prefix: case
VtuOutputSolver: Saving number of partitions: 1
ResultOutputSolver: -------------------------------------
MAIN: *** Elmer Solver: ALL DONE ***
MAIN: The end
SOLVER TOTAL TIME(CPU,REAL): 1.41 1.41
ELMER SOLVER FINISHED AT: 2023/12/22 13:54:21
It only calculates the potential but not the B field.
Did I forget something important?