Current density integration Paraview
Current density integration Paraview
Hi all! I would like to integrate the current density in the y direction over a surface section with paraview. Does anyone have any idea? Thankns in advance!
Re: Current density integration Paraview
Hi,
there is an "integrate variables" filter. You can see what filters there are in the manu under Filters->Alphabetical, and in the Help under "ParaView User Manual"->Filters.
HTH,
Matthias
there is an "integrate variables" filter. You can see what filters there are in the manu under Filters->Alphabetical, and in the Help under "ParaView User Manual"->Filters.
HTH,
Matthias
Re: Current density integration Paraview
Hi! Thanks for your answer. I saw that tool, but I think I do not understand it well. Do you have any experience using it? I have a cross shape where a current is flowing. I would like to know the current density in the y direction in, for example, an arm of the cross. Do you know how can I do this?
Thanks!
Thanks!
Re: Current density integration Paraview
No, I didn't use that filter so far, sorry.
For more detailed ParaView questions, I recommend to search the ParaView mailing list, and if you don't find an answer, ask there. You normally get an answer rather quickly.
Matthias
For more detailed ParaView questions, I recommend to search the ParaView mailing list, and if you don't find an answer, ask there. You normally get an answer rather quickly.
Matthias
Re: Current density integration Paraview
Hi everybody,
attached you find a simple 2Daxi testcase. To integrate the current density to obtain the current in Paraview, follow the step by step description below.
Best regards,
Felix
attached you find a simple 2Daxi testcase. To integrate the current density to obtain the current in Paraview, follow the step by step description below.
Best regards,
Felix