Hello,
Is there a way to nullify/clear an old WhitneyAVHarmonicSolver solution (Bicgstabl) during the Scan simulation type?
I am using the B-H curve model and running a Scan with different frequencies. It seems that every next scan, the solver uses the solution from the previous scan. This seems to cause convergence issues when there is a large difference in frequencies.
Thanks.
Nullify an old WhitneyAVHarmonicSolver solution
-
- Posts: 1
- Joined: 06 May 2024, 07:27
- Antispam: Yes
Re: Nullify an old WhitneyAVHarmonicSolver solution
I'd try to give
Linear System Nullify Guess = True
Linear System Nullify Guess = True