[SOLVED] Fusion 360 (3D CAD) to Gmsh to ElmerGUI
Posted: 02 Apr 2021, 22:19
Hello ,
It would be nice to know how I could make Fusion 360 (3D CAD) work with Gmsh/Salome and then ElmerGUI.
I would build complex geometries on Fusion 360 -> export STEP -> Gmsh/Salome 3D mesh -> Open file in ElmerGUI.
Unfortunately, I made a cube on Fusion 360 -> export STEP -> Gmsh 3D mesh -> Open file in ElmerGUI and it had 3 bodies.
I''m not sure why. I'm going to try Salome. It would be nice to know why this may have happened and/or how to avoid it.
I'm not comfortable with Gmsh/ElmerGrid so it would be nice to use Fusion 360 for complex geometries.
image: https://imgur.com/a/LygYNSg
Thanks !
It would be nice to know how I could make Fusion 360 (3D CAD) work with Gmsh/Salome and then ElmerGUI.
I would build complex geometries on Fusion 360 -> export STEP -> Gmsh/Salome 3D mesh -> Open file in ElmerGUI.
Unfortunately, I made a cube on Fusion 360 -> export STEP -> Gmsh 3D mesh -> Open file in ElmerGUI and it had 3 bodies.
I''m not sure why. I'm going to try Salome. It would be nice to know why this may have happened and/or how to avoid it.
I'm not comfortable with Gmsh/ElmerGrid so it would be nice to use Fusion 360 for complex geometries.
image: https://imgur.com/a/LygYNSg
Thanks !