I am unable to define Load / Pressure at specific location in Axis (x,y,z) in Elmer .
Eg. Rectangle Bar 1 mtr. x 0.05 m x 0.1 mtr....Axis in order X,Y,Z is load on Y Axis from Middle i.e at 0.5mtr. length.
How to define the above in ElmerGUI..Equation. Equation Use..Linear Elasticity
Kindly reply & thanks in advance.
How to Define Load Exact Position on Object/surface in Elmer
-
- Posts: 30
- Joined: 24 Jul 2019, 08:14
- Antispam: Yes
Re: How to Define Load Exact Position on Object/surface in Elmer
Hi,
I would advise to consult the documentation: Tutorials, Models Manual, Solver Manual.
In the Solver manual, you will find information on how to define a boundary condition as function of a variable, in your case the coordinates. Also a search on the forum often provides answers to frequently asked questions...
HTH,
Matthias
I would advise to consult the documentation: Tutorials, Models Manual, Solver Manual.
In the Solver manual, you will find information on how to define a boundary condition as function of a variable, in your case the coordinates. Also a search on the forum often provides answers to frequently asked questions...
HTH,
Matthias
-
- Posts: 2355
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
-
- Posts: 30
- Joined: 24 Jul 2019, 08:14
- Antispam: Yes
Re: How to Define Load Exact Position on Object/surface in Elmer
I got your concept. Actually if the assembly is complex and have to define load point by coordinates (x,y,z) axis,,,,then it will be much simpler.
Whether MATC can define such coordinates.
Whether MATC can define such coordinates.