Hi,
I read the manual about the reinitialization for the level set method, but, unfortunately, I didn't understand the technique used in Elmer. Does anyone know something about it? Thanks in advance.
Regards,
Andrea
Level set Reinitialization
-
- Posts: 176
- Joined: 22 Mar 2021, 18:39
- Antispam: Yes
- Location: POLYTHECNIC UNIVERSITY OF TURIN
Level set Reinitialization
POLYTECHNIC UNIVERSITY OF TURIN-DIMEAS
Re: Level set Reinitialization
Dear Andrea,
The test example (https://github.com/ElmerCSC/elmerfem/tr ... allingDrop) illustrates the concepts and techniques for using level set method in Elmer software.
The test example (https://github.com/ElmerCSC/elmerfem/tr ... allingDrop) illustrates the concepts and techniques for using level set method in Elmer software.
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
-
- Posts: 176
- Joined: 22 Mar 2021, 18:39
- Antispam: Yes
- Location: POLYTHECNIC UNIVERSITY OF TURIN
Re: Level set Reinitialization
Thanks, annier, I gave a look at the repository, but I didn't find any explication about the reinitialization of the Interface, just the interval of time when it works.annier wrote: ↑04 Sep 2021, 16:48 Dear Andrea,
The test example (https://github.com/ElmerCSC/elmerfem/tr ... allingDrop) illustrates the concepts and techniques for using level set method in Elmer software.
Regards,
Andrea
POLYTECHNIC UNIVERSITY OF TURIN-DIMEAS