Hello,
I am running an Elmer code (combined with python, running the python script) in Windows and multicore. When the calculation finishes, I do not receive any message in the terminal indicating it has finished. I just should periodically check the output file to see if it is still running. Can anyone guide me how I can resolve this issue?
Thank you so much.
Kindest regards,
Lida
Elmer does not flag when calculation is finished in multicore
-
- Posts: 24
- Joined: 14 Apr 2021, 17:12
- Antispam: Yes
Re: Elmer does not flag when calculation is finished in multicore
Hi Lida,
I have a very similar requirement in my project. I use python to run the FEM problem. I attached my script below to execute and scan files. Hope they can be helpful. They are similar to PyElmer.
Xinghao
I have a very similar requirement in my project. I use python to run the FEM problem. I attached my script below to execute and scan files. Hope they can be helpful. They are similar to PyElmer.
Xinghao
- Attachments
-
- elmer_py.txt
- (1.8 KiB) Downloaded 126 times
-
- Posts: 24
- Joined: 14 Apr 2021, 17:12
- Antispam: Yes
Re: Elmer does not flag when calculation is finished in multicore
Thanks so much Xinghao for your reply. I truly appreciate it. Can you also guide me how I should implement this? I added the lines you sent me to my Python code, but the same problem still exists. Is this how I was supposed to implement the code you sent me?
Thanks so much.
Kindest regards,
Lida
Thanks so much.
Kindest regards,
Lida