MULTIPHASE PROBLEM: ADAPTIVE MESHING WITH FREESURFACE

Numerical methods and mathematical models of Elmer
Post Reply
Andrea_P
Posts: 176
Joined: 22 Mar 2021, 18:39
Antispam: Yes
Location: POLYTHECNIC UNIVERSITY OF TURIN

MULTIPHASE PROBLEM: ADAPTIVE MESHING WITH FREESURFACE

Post by Andrea_P »

Good Evening dear community,
My problem is analyzing the flowing of a zinc film along a moving wall. Atop the zinc film, there is air. I am trying to include the adaptingmesh Solver in my case.sif and the FreeSurface solver; however I do not observe any mesh modifications near the velocity gradient while the fluid is moving. I attached my case.sif, my mesh and a gif of the phenomenon (zinc color is red).
Thanks in advance for your answers.
Regards,
Andrea
Attachments
results_2.gif
results_2.gif (1002.61 KiB) Viewed 831 times
rettangolo_0.1_x_0.15_raffianto_con_triangoli_grezzo.msh
(1.69 KiB) Downloaded 122 times
case.sif
(5.11 KiB) Downloaded 126 times
POLYTECHNIC UNIVERSITY OF TURIN-DIMEAS
Andrea_P
Posts: 176
Joined: 22 Mar 2021, 18:39
Antispam: Yes
Location: POLYTHECNIC UNIVERSITY OF TURIN

Re: MULTIPHASE PROBLEM: ADAPTIVE MESHING WITH FREESURFACE

Post by Andrea_P »

I used the excellent work posted by NJank in the post viewtopic.php?f=18&t=2193&p=20222&hilit ... esh#p20222
POLYTECHNIC UNIVERSITY OF TURIN-DIMEAS
Post Reply