Elmer Discussion Forum

Hello Rich,

and thanks for your feedback. It's clarifying the use of capacitance calculation.

All the best.

M

Sorry... but following a set of extra tests, I would say that my previous post was not correct. The problem is appearing in the case of capacitance calculation by the solver... when the option is "off", then all goes good. Is there something that I'm setting up wrong to arrive to that conc...

Ok! So, I did some extra tests and it seems to me that the problem comes from the way I set up the mesh in Salome. In order to simplify the process of applying BC, I was originally creating groups of faces in Salome... those groups were then appearing in the elmer boundaries, allowing me a faster al...

Dear Forum User, I'm struggling a bit with a basic electrostatic simulation(zip attached). The geometry and mesh was set up using salome 9.6.0 So, it's a simple T shape 3D structure... as BC, the base of the T is grounded, one side is at 2V and the other one is at 4V. There are also 2 different diel...