! Test case that shows how a part of the mesh can be use as a "component" ! and reduction operator can be applied to that part only. ! ! P.R. 10.3.2016 Check Keywords "Warn" Header Mesh DB "." "blocks2" End Simulation Max Output Level = 5 Coordinate System = Cartesian Simulation Type = Steady Output Intervals(1) = 1 Steady State Max Iterations = 1 ! Filename Numbering = Logical True Post File = "case.vtu" ! Increase mesh density Mesh Levels = 1 End Body 1 Target Bodies = 1 Equation = 1 Material = 1 End Equation 1 Name = "StatCurrent" Active Solvers(1) = 1 End Solver 1 Equation = "StatCurrent" Procedure = "StatCurrentSolve" "StatCurrentSolver" Variable = Potential ! Linear System Solver = direct Linear System Solver = "Iterative" Linear System Preconditioning = ilu2 Linear System Max Iterations = 1000 Linear System Convergence Tolerance = 1e-10 Linear System Iterative Method = BiCGStabL Linear System Residual Output = 20 Steady State Convergence Tolerance = 1e-06 Nonlinear System Consistent Norm = Logical True Update Components(1) = Integer 1 End Solver 2 Equation = "SaveScalars" Procedure = "SaveData" "SaveScalars" ! Filename = "f.dat" Show Norm Index = Integer 1 Save Component Results = Logical True End Material 1 Density = 1.0 Electric Conductivity = Real 1.0 End Component 1 Name = String "Resistant" Master Bodies(1) = Integer 1 Operator 1 = String "electric resistance" Variable 1 = String "potential" End Boundary Condition 1 Target Boundaries(1) = 1 Potential = Real 0.0 End Boundary Condition 2 Target Boundaries(1) = 2 Potential = Real 2.0 End Solver 2 :: Reference Norm = 1