loads calculation for heat equation
Posted: 26 Oct 2009, 21:09
Hello,
I tried to run one of the example cases when calculation loads is used /elmerhome/trunk/fem/tests/heateq_bdf2/. However, temp loads are zero everywhere (check the data.ep file). Do you have any idea why is so?
i use
ELMER SOLVER (v 5.5.0) STARTED AT: 2009/10/26 17:09:22
MAIN:
MAIN: ==========================================
MAIN: E L M E R S O L V E R S T A R T I N G
MAIN: Library version: 5.5.0 (Rev: 4165)
MAIN: ==========================================
results:
Variables in columns of matrix: scalars.result
1: int mean: temp
2: boundary sum: temp loads over bc 1
3: diffusive flux: temp over bc 1
4: boundary sum: loads over bc 1
bash-3.2$ cat scalars.result
3.581161796737E-002 0.000000000000E+000 3.596208250520E+000 8.000000000000E+000
5.338643389410E-002 0.000000000000E+000 1.710885492921E+000 8.000000000000E+000
6.708582357301E-002 0.000000000000E+000 8.325911592627E-001 8.000000000000E+000
7.834255793469E-002 0.000000000000E+000 3.259606889643E-001 8.000000000000E+000
8.795982828213E-002 0.000000000000E+000 -3.791959826471E-002 8.000000000000E+000
1.039189688880E-001 0.000000000000E+000 -5.933520236763E-001 8.000000000000E+000
1.165440976310E-001 0.000000000000E+000 -1.001502856126E+000 8.000000000000E+000
1.266241754267E-001 0.000000000000E+000 -1.312566769601E+000 8.000000000000E+000
regards, Martina.
I tried to run one of the example cases when calculation loads is used /elmerhome/trunk/fem/tests/heateq_bdf2/. However, temp loads are zero everywhere (check the data.ep file). Do you have any idea why is so?
i use
ELMER SOLVER (v 5.5.0) STARTED AT: 2009/10/26 17:09:22
MAIN:
MAIN: ==========================================
MAIN: E L M E R S O L V E R S T A R T I N G
MAIN: Library version: 5.5.0 (Rev: 4165)
MAIN: ==========================================
results:
Variables in columns of matrix: scalars.result
1: int mean: temp
2: boundary sum: temp loads over bc 1
3: diffusive flux: temp over bc 1
4: boundary sum: loads over bc 1
bash-3.2$ cat scalars.result
3.581161796737E-002 0.000000000000E+000 3.596208250520E+000 8.000000000000E+000
5.338643389410E-002 0.000000000000E+000 1.710885492921E+000 8.000000000000E+000
6.708582357301E-002 0.000000000000E+000 8.325911592627E-001 8.000000000000E+000
7.834255793469E-002 0.000000000000E+000 3.259606889643E-001 8.000000000000E+000
8.795982828213E-002 0.000000000000E+000 -3.791959826471E-002 8.000000000000E+000
1.039189688880E-001 0.000000000000E+000 -5.933520236763E-001 8.000000000000E+000
1.165440976310E-001 0.000000000000E+000 -1.001502856126E+000 8.000000000000E+000
1.266241754267E-001 0.000000000000E+000 -1.312566769601E+000 8.000000000000E+000
regards, Martina.