CoilSolver and Massive coils
Posted: 29 Mar 2024, 02:13
Hello all,
I've been having trouble using massive coils and CoilSolver.
Please find the simulation files attached here. For the mesh, there is a Salome File to create the mesh.
For the CoilSolver I have simulated using Stranded coil, which works fine. And then I've tryied using a single turn Stranded coil with 'Normalize Coil Current = Logical False'. The current density goes to the roof.
Then, changing to Massive coil, the result is:
With the circuit defined as voltage source, result is trivially zero.
However, using Wsolve results are perfect, agreeing with axissymmetric FEMM results.
I've been having trouble using massive coils and CoilSolver.
Please find the simulation files attached here. For the mesh, there is a Salome File to create the mesh.
For the CoilSolver I have simulated using Stranded coil, which works fine. And then I've tryied using a single turn Stranded coil with 'Normalize Coil Current = Logical False'. The current density goes to the roof.
Then, changing to Massive coil, the result is:
Code: Select all
SolveLinearSystem: Assuming complex valued linear system
ERROR:: IterSolve: Numerical Error: System diverged over maximum tolerance.
Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO
STOP 1
However, using Wsolve results are perfect, agreeing with axissymmetric FEMM results.