ElmerGUI: wrong solver specific option shown
Posted: 16 Feb 2022, 20:35
Hi,
when clicking on Model -> Equation -> "Add" or on an existing equation
then selecting the tab "Heat Equation" or "SaveScalars"
and then "Edit Solver Settings"
and then selecting the tab "Solver specific option",
the tab shows the content of the solver specific option of the solver that is just before "Heat Equation" or "SaveScalars" respectively.
So, instead of showing the solver specific option of the "Heat Equation", the solver specific option of the "FluxSolver" "FluxSolver" procedure are shown.
Instead of showing the solver specific option of the "SaveScalars", the solver specific option of the "SaveData" "SaveLine" procedure are shown.
Windows 10,
today's nightly build or less recent one's:
MAIN: Version: 9.0 (Rev: Release, Compiled: 2022-02-16)
MAIN: Running one task without MPI parallelization.
MAIN: Running with just one thread per task.
MAIN: Lua interpreter linked in.
Directory C:\ElmerFEM-gui-nompi-Windows-AMD64\share\ElmerGUI\edf
coilsolver.xml
edf.xml
egini.xml
egmaterials.xml
electrostatics.xml
fluxsolver.xml
heatequation.xml
helmholtz.xml
linearelasticity.xml
list.txt
magnetodynamics.xml
magnetodynamics2d.xml
mc.ini
meshdeform.xml
navier-stokes.xml
resultoutput.xml
saveline.xml
savescalars.xml
statcurrent.xml
Thanks,
Matteo
when clicking on Model -> Equation -> "Add" or on an existing equation
then selecting the tab "Heat Equation" or "SaveScalars"
and then "Edit Solver Settings"
and then selecting the tab "Solver specific option",
the tab shows the content of the solver specific option of the solver that is just before "Heat Equation" or "SaveScalars" respectively.
So, instead of showing the solver specific option of the "Heat Equation", the solver specific option of the "FluxSolver" "FluxSolver" procedure are shown.
Instead of showing the solver specific option of the "SaveScalars", the solver specific option of the "SaveData" "SaveLine" procedure are shown.
Windows 10,
today's nightly build or less recent one's:
MAIN: Version: 9.0 (Rev: Release, Compiled: 2022-02-16)
MAIN: Running one task without MPI parallelization.
MAIN: Running with just one thread per task.
MAIN: Lua interpreter linked in.
Directory C:\ElmerFEM-gui-nompi-Windows-AMD64\share\ElmerGUI\edf
coilsolver.xml
edf.xml
egini.xml
egmaterials.xml
electrostatics.xml
fluxsolver.xml
heatequation.xml
helmholtz.xml
linearelasticity.xml
list.txt
magnetodynamics.xml
magnetodynamics2d.xml
mc.ini
meshdeform.xml
navier-stokes.xml
resultoutput.xml
saveline.xml
savescalars.xml
statcurrent.xml
Thanks,
Matteo