Hi all,
I'm investigating an electrical machine in 2D with embedded permanent magnets in the rotor.
If I calculate the torque by means of giving "r outer" and r Inner" (Arkkio's equation?) and compare it with the torque calculated by means of "Torque Groups" on the stator, the results are quite similar. However, if I calculate the torque by means of "Torque Groups" on the rotor the results are different (difference around 1%).
In Paraview, I saw nodal forces on several places in the rotor. I didn't understand the nodal forces around the magnets and tried to understand it.
I made a simple example (Magnet3.zip) with an iron circuit (light grey) around a magnet (red).
The magnet is magnetized in the x direction and in Paraview (the vtu file is in Magnet3.zip), I saw nodal forces (x component) on the iron sides of the small air gaps between iron and magnet. However, I missed the corresponding force on the magnet side.
Any help in understanding this problem is helpful.
With kind regards,
Martin Hoeijmakers
Nodal Forces with permanent magnet
-
- Posts: 40
- Joined: 22 Oct 2017, 21:03
- Antispam: Yes
Nodal Forces with permanent magnet
- Attachments
-
- Magnet3.zip
- (901.33 KiB) Downloaded 273 times