Re: periodic BC and moving mesh
Posted: 03 Oct 2018, 12:24
Hi Martina,
I see no reason why this could not work. Difficult to say where the problem lies without having access to the whole case.
One possibility: if your "mesh update 2" is periodic you don't fix the absolute value. You should have at least some fixed value at some boundary for each direction so the mesh does not start flying around.
-Peter
I see no reason why this could not work. Difficult to say where the problem lies without having access to the whole case.
One possibility: if your "mesh update 2" is periodic you don't fix the absolute value. You should have at least some fixed value at some boundary for each direction so the mesh does not start flying around.
-Peter