Paraview does not start
Posted: 08 Jul 2018, 11:58
Hello,
Paraview does start for me.
I have installed elmerfem-8.2_Windows-AMD64.exe and ParaView-5.5.2-Qt5-Windows-64bit.exe on a Windows 10 64bit laptop. Well, the ELMER_POST_HOME system variable was missing, but I set it to C:\Program Files (x86)\Elmer 8.2-Release\bin\share\elmpost -- correct? I added C:\Program Files (x86)\Elmer 8.2-Release\lib to the path. I also added the system variable PARAVIEW_HOME as C:\Program Files\ParaView 5.5.2-Qt5-Windows-64bit\bin, and the path C:\Program Files\ParaView 5.5.2-Qt5-Windows-64bit\bin to PATH. The ElmerGUI installation tester is all green.
I am trying to replicate tutorial 3 -- Loaded elastic beam -- from the Elmer GUI Tutorial. The only difference, in Model -> Setup -> Post file I now set case.vtu instead of the default case.ep. Neither makes a difference below, though.
File -> Save Project + Sif Generate + Run -> Start Solver seem to work. At least the Solver log does not show any errors. However, Run -> Start Paraview doesn't do a thing: no window, no error message, no nothing.
So, I try to run Paraview standalone. File -> Open -> case001.vtu is loaded, but Paraview crashes when visualizing any property.
Any idea, thanks,
Birke
Paraview does start for me.
I have installed elmerfem-8.2_Windows-AMD64.exe and ParaView-5.5.2-Qt5-Windows-64bit.exe on a Windows 10 64bit laptop. Well, the ELMER_POST_HOME system variable was missing, but I set it to C:\Program Files (x86)\Elmer 8.2-Release\bin\share\elmpost -- correct? I added C:\Program Files (x86)\Elmer 8.2-Release\lib to the path. I also added the system variable PARAVIEW_HOME as C:\Program Files\ParaView 5.5.2-Qt5-Windows-64bit\bin, and the path C:\Program Files\ParaView 5.5.2-Qt5-Windows-64bit\bin to PATH. The ElmerGUI installation tester is all green.
I am trying to replicate tutorial 3 -- Loaded elastic beam -- from the Elmer GUI Tutorial. The only difference, in Model -> Setup -> Post file I now set case.vtu instead of the default case.ep. Neither makes a difference below, though.
File -> Save Project + Sif Generate + Run -> Start Solver seem to work. At least the Solver log does not show any errors. However, Run -> Start Paraview doesn't do a thing: no window, no error message, no nothing.
So, I try to run Paraview standalone. File -> Open -> case001.vtu is loaded, but Paraview crashes when visualizing any property.
Any idea, thanks,
Birke