Elmer Discussion Forum

Hello,

Do you know a manual which explains commands to use ElmerPost (choose parameters to see, change scale, edit title...) ?

Yours.

Alex

Hi

There is no ElmerPost manual. You could see this though:
http://www.nic.funet.fi/pub/sci/physics ... 4April.pdf

It shows how to do the same things with ElmerPost and Paraview. Generally I recommend using Paraview.

-Peter

Hi,

AFAIR there is some documentation in ElmerPost's help menu.
But I also recommend ParaView...

HTH,

Matthias

Thank you both for your fast reply

Hi AlexR,
Are you using Linux OS?
Yours
Anil Kunwar

Hi,
No, I use windows 7. Does using Linux change anything ?
Yours

Hi AlexR,
If you are using Linux OS, it can be easier for you to build or compile Elmer.
It is easy to work with ElmernonGUI.
Also, you could have flexibility in using from a variety of preprocessing and postprocessing softwares.
Linux provides a good platform for compiling softwares.

In my context, I use Ubuntu 12.04 LTS.
For Finite Element Method, I am using Salome 5.1.3 (preprocessor), Elmer Solver and Paraview (Postprocessor).

Yours
Anil Kunwar

OK, thank you for your advice. I'm not really sure I can use Linux on my workplace But regarding to possibilities it offers, it could be the good choice !

Yours

Hi,

annier wrote: For Finite Element Method, I am using Salome 5.1.3 (preprocessor), Elmer Solver and Paraview (Postprocessor).

all those exist under Windoze also. I have to use it at work (I use Linux at home)...

Matthias