I installed elmer in windows 7 from sourceforge link. After install, can't find any electromagnetics module in it. Also, where is the pre-processor (elmergrid or other) ? Or is it just a solve where you import mesh from somewhere else ?
I am new to it and would appreciate some help.
After install, can't find electromagnetics module in ELMER
Re: After install, can't find electromagnetics module in ELMER
Hi,
there is an electrostatic and a static current solver, plus several ones for magnetics. If you don't find a solver in ElmerGUI, you can move the corresponding xml from bin/edf-extra to bin/edf in your installation directory. There are manuals and a tutorial here: http://www.csc.fi/english/pages/elmer/documentation. BEsides the tutorial, you should have a look into the ElmerGUI manual and the models manual.
HTH,
Matthias
there is an electrostatic and a static current solver, plus several ones for magnetics. If you don't find a solver in ElmerGUI, you can move the corresponding xml from bin/edf-extra to bin/edf in your installation directory. There are manuals and a tutorial here: http://www.csc.fi/english/pages/elmer/documentation. BEsides the tutorial, you should have a look into the ElmerGUI manual and the models manual.
HTH,
Matthias