Hi all
I install the elmer on Win 7, I want use the model ShallowNS: inside the elmer ,which is announced newly released in the elmer 7. but i could not find the equation ShallowNS in the elmer-GUI--> MODEL ---EQUATION-- ADD?
How could I used the ShallowNS model ?
thanks in advance`
Han Ming
ShallowNS: model
-
- Site Admin
- Posts: 4832
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: ShallowNS: model
Hi Han Ming
This is a solver that is in it's early phases of development. No GUI, no documentation, but if somebody want's to work with that it might provide a good starting point.
-Peter
This is a solver that is in it's early phases of development. No GUI, no documentation, but if somebody want's to work with that it might provide a good starting point.
-Peter
Re: ShallowNS: model
Hi,
if you want to use the solver with ElmerGUI, you can rather easily make a new menu entry yourself. Just have a look into the ElmerGUIManual, Appendix C. Also the existing xml files in bin/edf and bin/edf-extra in the Elmer program directory provide some examples.
Beware that existing ElmerGUI projects might not open correctly when the number of solvers in bin/edf is changed. A workaround for this problem can be found here: viewtopic.php?f=4&t=847&p=6614
HTH,
Matthias
if you want to use the solver with ElmerGUI, you can rather easily make a new menu entry yourself. Just have a look into the ElmerGUIManual, Appendix C. Also the existing xml files in bin/edf and bin/edf-extra in the Elmer program directory provide some examples.
Beware that existing ElmerGUI projects might not open correctly when the number of solvers in bin/edf is changed. A workaround for this problem can be found here: viewtopic.php?f=4&t=847&p=6614
HTH,
Matthias