Dear experts
I calculated a static field map of several wires and got the ".vtu" file. Then I tried to view the field on Paraview, but all I got is the geometry, how can I also view the field?
I attach my .geo file and .sif file here.
mesh flow:
$gmsh prototype.geo -3 -o prototype.msh
$ElmerGrid 14 2 prototype.msh -autoclean
How to view the result of static electric field
How to view the result of static electric field
- Attachments
-
- prototype.sif
- (1.68 KiB) Downloaded 35 times
-
- prototype.geo
- (2.01 KiB) Downloaded 32 times
Re: How to view the result of static electric field
Hello,
Chapter 5 in GetStartedElmer.pdf shows basic usage of Paraview with Elmer.
After clicking on 'Apply', look for the box 'Coloring'. Click on 'Solid Color' in the box and it should show a drop box with the variables listed. Select the variable of interest, it should show up on the layout window.
Rich.
Chapter 5 in GetStartedElmer.pdf shows basic usage of Paraview with Elmer.
After clicking on 'Apply', look for the box 'Coloring'. Click on 'Solid Color' in the box and it should show a drop box with the variables listed. Select the variable of interest, it should show up on the layout window.
Rich.