Clean / restart WhitneyAVHarmonicSolver solution between scans

Numerical methods and mathematical models of Elmer
Post Reply
vencels
Posts: 63
Joined: 20 Sep 2016, 17:05
Antispam: Yes
Location: Latvia
Contact:

Clean / restart WhitneyAVHarmonicSolver solution between scans

Post by vencels »

Hello,

Is there a way to nullify/clear an old WhitneyAVHarmonicSolver solution (Bicgstabl) during the Scan simulation type?

I am using the B-H curve model and running a Scan with different frequencies. It seems that every next scan, the solver uses the solution from the previous scan. This seems to cause convergence issues when there is a large difference in frequencies.

Thanks
raback
Site Admin
Posts: 4812
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: Clean / restart WhitneyAVHarmonicSolver solution between scans

Post by raback »

Hi Juris,

Maybe

Code: Select all

Linear System Nullify Guess = Logical True
-Peter
Post Reply