Hi all,
I finally got a reasonable mesh from gmsh.
See
I then ran the .msh file through ElmerGrid 14 2 to produce the mesh directory. When I loaded the mesh file into ElmerGUI, I got:
Anyone have any idea what is going on here.
Gary R
ElmerGrid output garbage
-
- Posts: 2317
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: ElmerGrid output garbage
you would have to post your mesh file
Re: ElmerGrid output garbage
Sorry about the missing files. I could only attach the .msh file. This site will not allow more than 3 attachments and the .mesh files consist of 4 separate files. I will try to send them in two separate posts.If you need them,
P.S. i'm having trouble getting the attachments to work. I'll send the files as soon as possible.
Gary R
P.S. i'm having trouble getting the attachments to work. I'll send the files as soon as possible.
Gary R
Re: ElmerGrid output garbage
Finally got access again. Thank you Peter Raback!!!
Attached are the .msh and the first .mesh file. The rest will follow.
Gary R
Attached are the .msh and the first .mesh file. The rest will follow.
Gary R
- Attachments
-
- mesh.boundary
- (1.04 KiB) Downloaded 186 times
-
- HyperbolicHornXsection-Surface.msh
- (9.9 KiB) Downloaded 182 times
Re: ElmerGrid output garbage
Here is the rest of the .mesh files.
Gary R.
Gary R.
- Attachments
-
- mesh.nodes
- (4.41 KiB) Downloaded 182 times
-
- mesh.header
- (70 Bytes) Downloaded 177 times
-
- mesh.elements
- (4.42 KiB) Downloaded 174 times
-
- Posts: 2317
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: ElmerGrid output garbage
Could not find the issue, I got the same results. Must be something with mesh format. I went into gmsh options and changed the mesh format to 2 which is a universal file and it worked,
Re: ElmerGrid output garbage
I finally got the bugs out of the problem and plan on including it in contributed cases. I'm also including a .png file of the run of a 5Khz problem. I hope this helps other people.
Gary R
adding attachments
Gary R
adding attachments