How to apply multiple solver on one body
How to apply multiple solver on one body
I want to perform an Acoustic duct mode analysis. How can I do that with Elmer GUI?
-
- Posts: 2318
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: How to apply multiple solver on one body
Thank you!
how to define Mortar BC?
how to define Mortar BC for analysis of electric motors?
-
- Posts: 2318
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: How to apply multiple solver on one body
I'm unable to find how to Activates the use of edge element basis functions for the mortar conditions.
I'm working on 3-D BLDC PM motor and for maxwell stress analysis, I'm using MagDyn solver.
I'm working on 3-D BLDC PM motor and for maxwell stress analysis, I'm using MagDyn solver.
-
- Posts: 2318
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: How to apply multiple solver on one body
https://github.com/ElmerCSC/elmerfem/bl ... s/case.sif
look at this test case, and others in the test directory
look at this test case, and others in the test directory
-
- Posts: 2318
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: How to apply multiple solver on one body
Ok, Sir. I'll go through this. Thank you.
Re: How to apply multiple solver on one body
how to calculate transmission loss analysis of a muffler using Elmer? Can anyone give some reference?