Elmer FEM-OpenFOAM-Dakota: An open-source framework for data analytics, finite element and finite volume methods

Mesh generators, CAD programs, and other tools
Post Reply
asandip
Posts: 92
Joined: 09 May 2019, 22:06
Antispam: Yes

Elmer FEM-OpenFOAM-Dakota: An open-source framework for data analytics, finite element and finite volume methods

Post by asandip »

A program for 3 way coupling between open-source software Elmer FEM, OpenFOAM and Dakota has been developed. EOF Library was employed to invoke communication between Elmer and OpenFoam during run time. The program along with benchmark test and other examples can be found here: https://github.com/AnjaliSandip/ElmerFE ... OAM-Dakota


Capabilities: The interface provides an open-source framework that integrates data analytics, finite element and finite volume methods. This framework enables a richer understanding of multi-physics/phase predictions in a time sensitive manner. Its key features include uncertainty quantification, surrogate modeling, parallel programming and robust post-processing capabilities.
Last edited by asandip on 06 Aug 2020, 17:30, edited 2 times in total.
raback
Site Admin
Posts: 4812
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: Elmer FEM-OpenFOAM-Dakota: An open-source framework for data analytics, finite element and finite volume methods

Post by raback »

Hi,

You might mention that EOF library was used for coupling. This starts to be quite complex already! I hope people will incresingly find the combination of different open source tools useful. Keep up the good work!

-Peter
asandip
Posts: 92
Joined: 09 May 2019, 22:06
Antispam: Yes

Re: Elmer FEM-OpenFOAM-Dakota: An open-source framework for data analytics, finite element and finite volume methods

Post by asandip »

Thanks, Peter! I hope people find the framework useful.
Post Reply