Hi,
question 1)
If you use EmlerGUI, don't edit the sif file manually, as it will be overwritten. There are free text fields where you can put stuff which is not contained in the menus and dialogs. And you can add missing keywords in the xml definition of the solver settings.
You can also have the sif file generated by ElmerGUI only the first time (or write it from scratch), then edit it with your preferred text editor (e.g. notepad++) and start ElmerSolver from a DOS box. Just cd to the directory where the sif resides and say
elmersolver
and the solver should start, spitting its output to the DOS box. You can redirect it to a file also.
HTH,
Matthias
How to increase accuracy?
Re: How to increase accuracy?
Hi Michal,
you know what I found out?
Compare this two figures from national iso-standards: I sat hours doubting what was saying mine, see body 3. For big luck I found yours. What without you?? Thank you. For that standardization bodies charge thousands of Euros annually, that nobody notices their bugs and anybody who faces them at last is left helplessly?
Already went and filled up the gap with air.
Temperaturleitfähigkeit ausgewählter Nichtmetalle bei 20 °C
Dichte (ρ)
in 103 kg·m−3 spezifische
Wärmekapazität (c)
in kJ/(kg·K) Wärmeleit-
fähigkeit
(λ) in W/(m·K) Temperatur-
leitfähigkeit (a)
in 10−6 m2/s
Luft 0,0013 1,01 0,026 20
Really true.
Lets see what is coming next. - Something comes.
Regards
you know what I found out?
Compare this two figures from national iso-standards: I sat hours doubting what was saying mine, see body 3. For big luck I found yours. What without you?? Thank you. For that standardization bodies charge thousands of Euros annually, that nobody notices their bugs and anybody who faces them at last is left helplessly?
Already went and filled up the gap with air.
Temperaturleitfähigkeit ausgewählter Nichtmetalle bei 20 °C
Dichte (ρ)
in 103 kg·m−3 spezifische
Wärmekapazität (c)
in kJ/(kg·K) Wärmeleit-
fähigkeit
(λ) in W/(m·K) Temperatur-
leitfähigkeit (a)
in 10−6 m2/s
Luft 0,0013 1,01 0,026 20
Really true.
Lets see what is coming next. - Something comes.
Regards
- Attachments
-
- ref_tedesco.png (35.04 KiB) Viewed 1754 times
-
- ref_deutsch.jpg (24.32 KiB) Viewed 1754 times