[*]Create geometry in FreeCAD, e.g. box with 1/8 sphere cut out of the corner (attached .step file)
[*]Load .step file in NETGEN, generate mesh (result image attached), choose Elmer export format, export.
[*]Elmer File -> Load mesh, specify the directory.
[*]Model -> Setup, any other modifications
[*]File -> Save project (same directory), result is fine
[*]Sif -> Generate *crash*
Here's the console output:
Code: Select all
SifGenerator: Body index out of bounds
Program received signal SIGSEGV, Segmentation fault.
0x00000000004c46b9 in SifGenerator::makeBoundaryBlocks() ()
I'll work on debugging and report back. In the meantime, any ideas?