Problem with loading GMSH generated mesh to ElmerGUI
Posted: 29 Dec 2016, 13:08
Hello,
I have a very simple square geometry defined in GMSH as
You can see the mesh in picture attached, in the upper part. However, when I try to load corresponding mesh to ElmerGUI, it looks very odd. See the bottom part of the picture. What goes wrong? I include msh file as well.
With regards,
Estiivan
I have a very simple square geometry defined in GMSH as
Code: Select all
//+
Point(1) = {-3, 3, 0, 1.0};
//+
Point(2) = {-3, -3, 0, 1.0};
//+
Point(3) = {3, -3, 0, 1.0};
//+
Point(4) = {3, 3, 0, 1.0};
//+
Line(1) = {1, 2};
//+
Line(2) = {2, 3};
//+
Line(3) = {3, 4};
//+
Line(4) = {4, 1};
//+
Line Loop(5) = {1, 2, 3, 4};
//+
Plane Surface(6) = {5};
With regards,
Estiivan