Good Day,
I am trying to mesh a thin-walled cylindrical shape in Elmer 8.2. I have floated to Netgen 6.0 as a way to generate geometries. However, I am having no luck. The closest that seems to work is attached cylinder_test.geo. When I try to load this into the Netgen, it simply freezes.
The other method that got me somewhere but not close to my goal is adapting the CircleInCircle.in2d for Elmer directly. However, I can't seem to extrude this geometry any distance.
Any advice on how to acheive this would be greatly appreciated as I am hitting a wall.
Sincerely,
Theresa
[SOLVED] Generate a cylindrical shell
[SOLVED] Generate a cylindrical shell
- Attachments
-
- CircleInCircle_v2.in2d
- Elmer Direct
- (613 Bytes) Downloaded 379 times
-
- cylinder_test.geo
- via Netgen
- (299 Bytes) Downloaded 371 times
Last edited by pretzel21 on 04 Aug 2016, 21:12, edited 1 time in total.
[SOLVED] Re: Generate a cylindrical shell
Head slap ...
You guys have great slides. I should have seen that earlier.
http://www.nic.funet.fi/index/elmer/cou ... ay2010.pdf
Open, not load mesh.
Yah Gmsh! Yah Elmer!
Thank you
You guys have great slides. I should have seen that earlier.
http://www.nic.funet.fi/index/elmer/cou ... ay2010.pdf
Open, not load mesh.
Yah Gmsh! Yah Elmer!
Thank you