Page 1 of 1

gmsh and conformal meshes (possible fix)

Posted: 29 Feb 2016, 12:53
by mark smith
Hi All,
This post http://onelab.info/pipermail/gmsh/2016/010378.html might be of interest as it introduces a tool to fix the non-conformal mesh problem that many have experienced with gmsh, I have yet to try it but I thought it might be of interest to others.
Regards
Mark

Re: gmsh and conformal meshes (possible fix)

Posted: 29 Feb 2016, 13:12
by mzenker
Hi,

thanks for the hint!
This would be even more interesting if it could handle geometries from STEP format - it is not always a good idea to convert them to geo format, since gmsh is intended to handle STEP directly.

Matthias