Hi All,
This post http://onelab.info/pipermail/gmsh/2016/010378.html might be of interest as it introduces a tool to fix the non-conformal mesh problem that many have experienced with gmsh, I have yet to try it but I thought it might be of interest to others.
Regards
Mark
gmsh and conformal meshes (possible fix)
-
- Posts: 215
- Joined: 26 Aug 2009, 18:20
- Location: Peterborough, England
Re: gmsh and conformal meshes (possible fix)
Hi,
thanks for the hint!
This would be even more interesting if it could handle geometries from STEP format - it is not always a good idea to convert them to geo format, since gmsh is intended to handle STEP directly.
Matthias
thanks for the hint!
This would be even more interesting if it could handle geometries from STEP format - it is not always a good idea to convert them to geo format, since gmsh is intended to handle STEP directly.
Matthias