Hi,
how can i see the results of the elmer simulation (linear static analysis) with paraview?
do i have to open the case.ep file? but how?
i'm under windows xp
thanks a lot
help using paraview as post processor
Re: help using paraview as post processor
Hi,
use the ResultOutput solver with
Output Format = Vtu
Binary Output = True
and open the resulting file(s) with ParaView.
Matthias
use the ResultOutput solver with
Output Format = Vtu
Binary Output = True
and open the resulting file(s) with ParaView.
Matthias
Re: help using paraview as post processor
Do i have to set these option before starting the simulation? in Elmer GUI?
thanks
thanks
Re: help using paraview as post processor
Yes.
The .ep file can only be read by ElmerPost AFAIK.
Matthias
The .ep file can only be read by ElmerPost AFAIK.
Matthias
Re: help using paraview as post processor
I can't find the resultoutput solver.
DO i have to manually edit the sif file?
thanks
DO i have to manually edit the sif file?
thanks
Re: help using paraview as post processor
Hi,
copy resultoutput.xml from bin/edf-extra to bin/edf in you Elmer program directory and restart ElmerGUI.
Matthias
copy resultoutput.xml from bin/edf-extra to bin/edf in you Elmer program directory and restart ElmerGUI.
Matthias
Re: help using paraview as post processor
mmm. i don't have resultoutput.xml in edf-extra
Re: help using paraview as post processor
ok found...i've it already in edf folder....where is the command in elmergui?
Re: help using paraview as post processor
sorry ...found in equation menu...thanks for your help