Hey all,
I'm a brand new user to Elmer, after a long search for an open source FES. I'm thrilled to have found Elmer, and just started working through the tutorial.
I went through the very first example (TemperatureAngle) and found it fairly straightforward; however, after the solver has run, I run "Run -> Postprocessor" and find that a black image comes up. ElmerPost opens up with a window titled "ELMER POST GRAPHICS", however the window stays blank no matter what options I click.
Any suggestions as to how to get ElmerPost to give me a picture?
Thanks!
ElmerPost produces no image
Re: ElmerPost produces no image
Hi,
get an image when I do the following:
1. Open the file case.ep in ElmerPost (I took the existing file from TemperatureAngleGUI, did not run the solver again)
2. Click on the "ColorMesh" button
3. In the "Color Mesh Edit" box, select Temperature as Color Variable and "Both" as Mesh Style (don't forget to click on "Apply")
This should work for you with the existing case.ep. If it doesn't work for your newly calculated case.ep, there might be something wrong with your solver run...
HTH,
Matthias
get an image when I do the following:
1. Open the file case.ep in ElmerPost (I took the existing file from TemperatureAngleGUI, did not run the solver again)
2. Click on the "ColorMesh" button
3. In the "Color Mesh Edit" box, select Temperature as Color Variable and "Both" as Mesh Style (don't forget to click on "Apply")
This should work for you with the existing case.ep. If it doesn't work for your newly calculated case.ep, there might be something wrong with your solver run...
HTH,
Matthias
Re: ElmerPost produces no image
That worked perfectly! Thank you so much
Re: ElmerPost produces no image
Hi, i have same problem, but on step 2. Click on the "ColorMesh" button i was confused. It is just black screen, there is no buttons. Could you describe more precisely, please?
Re: ElmerPost produces no image
It is OK i'l get it!