How to Define Load Exact Position on Object/surface in Elmer
Posted: 29 Aug 2019, 11:45
I am unable to define Load / Pressure at specific location in Axis (x,y,z) in Elmer .
Eg. Rectangle Bar 1 mtr. x 0.05 m x 0.1 mtr....Axis in order X,Y,Z is load on Y Axis from Middle i.e at 0.5mtr. length.
How to define the above in ElmerGUI..Equation. Equation Use..Linear Elasticity
Kindly reply & thanks in advance.
Eg. Rectangle Bar 1 mtr. x 0.05 m x 0.1 mtr....Axis in order X,Y,Z is load on Y Axis from Middle i.e at 0.5mtr. length.
How to define the above in ElmerGUI..Equation. Equation Use..Linear Elasticity
Kindly reply & thanks in advance.