beginners questions: black screen, flux values
Re: beginners questions: black screen, flux values
thanks for these points.
Re: beginners questions: black screen, flux values
Code: Select all
and in addition, you have many examples under $ELMER_HOME\tests.
So next I can calmly study the sif files in advance. Thank you very much, had not found that without your help I believe.
One word to the GUI-NonGUI dualism: The beginner is tented to reconvert the sample sif-file to a GUI-Project-file form, cause there is where he was starting learning, is not he? And that is not possible, right? So there is where he loses track, imho.
One more question:
Code: Select all
find ~/elmerfem/fem/tests -name "*.sif"|xargs grep "\!.Post"|wc
69 347 5647
Last edited by teobo on 07 Oct 2014, 23:26, edited 1 time in total.
-
- Site Admin
- Posts: 4825
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: beginners questions: black screen, flux values
Writing of Post files is supressed because the tests check consistency of the norm of the results which does not need written output. It just generates additional I/O. -Peter
Re: beginners questions: black screen, flux values
Hm, sometimes however you check the entire ep-file.raback wrote:Writing of Post files is supressed because the tests check consistency of the norm of the results which does not need written output. It just generates additional I/O. -Peter
so anyway: in uncommented state the ep-files are supposed to be valid, right?
Re: beginners questions: black screen, flux values
Hi, I also have a problem with ElmerPost.
First it worked properly. Now when I start ElmerPost I see only black and grey window (as in att.) I know that I can use VTK and PV but I wanted to ask how I can repair it.
First it worked properly. Now when I start ElmerPost I see only black and grey window (as in att.) I know that I can use VTK and PV but I wanted to ask how I can repair it.
- Attachments
-
- elmerPost.png
- black&gray ElmerPost screen
- (45.03 KiB) Not downloaded yet