How to Define Load Exact Position on Object/surface in Elmer

Post processing utility for Elmer
Post Reply
sameer21101970
Posts: 27
Joined: 24 Jul 2019, 08:14
Antispam: Yes

How to Define Load Exact Position on Object/surface in Elmer

Post by sameer21101970 » 29 Aug 2019, 11:45

I am unable to define Load / Pressure at specific location in Axis (x,y,z) in Elmer .

Eg. Rectangle Bar 1 mtr. x 0.05 m x 0.1 mtr....Axis in order X,Y,Z is load on Y Axis from Middle i.e at 0.5mtr. length.

How to define the above in ElmerGUI..Equation. Equation Use..Linear Elasticity

Kindly reply & thanks in advance.

mzenker
Posts: 1963
Joined: 07 Dec 2009, 11:49
Location: Germany

Re: How to Define Load Exact Position on Object/surface in Elmer

Post by mzenker » 29 Aug 2019, 12:05

Hi,

I would advise to consult the documentation: Tutorials, Models Manual, Solver Manual.
In the Solver manual, you will find information on how to define a boundary condition as function of a variable, in your case the coordinates. Also a search on the forum often provides answers to frequently asked questions...

HTH,
Matthias


sameer21101970
Posts: 27
Joined: 24 Jul 2019, 08:14
Antispam: Yes

Re: How to Define Load Exact Position on Object/surface in Elmer

Post by sameer21101970 » 29 Aug 2019, 16:19

I got your concept. Actually if the assembly is complex and have to define load point by coordinates (x,y,z) axis,,,,then it will be much simpler.

Whether MATC can define such coordinates.

Post Reply