Page 1 of 1
HEAT TRANSFER
Posted: 25 Sep 2017, 21:51
by payam
HELLO,
I want to simulated the heat transfer model of one electrical motor, I have problem how to define the losses of the machine Could you please help me?
Also, if you have any example about this could you please send it to me ?
Re: HEAT TRANSFER
Posted: 26 Sep 2017, 10:51
by mzenker
Hi,
for examples, check out the tutorials. There are two sets of them - one with ElmerGUI (to be found on the documentation page:
https://www.csc.fi/web/elmer/documentation) and one without GUI (the manual is
here, the files are on the documentation page).
I am no machine expert - you will probably want to model heat transfer between your machine and the surrounding air? In that case, just define a heat transfer coefficient and an external temperature for the outer boundaries of your machine.
HTH,
Matthias
Re: HEAT TRANSFER
Posted: 26 Sep 2017, 11:13
by payam
Thank you so much .
Re: HEAT TRANSFER
Posted: 05 Nov 2017, 17:10
by Halbrook
paya3m wrote: ↑25 Sep 2017, 21:51
HELLO,
I want to simulated the heat transfer model of one electrical motor, I have problem how to define the losses of the machine Could you please help me?
Also, if you have any example about this could you please send it to me ?
Great resources. Thanks for sharing the good stuff Mzenker.