surface tension (Marangoni effect) driven 2-phase flows

General discussion about Elmer
Post Reply
fmuldoo
Posts: 2
Joined: 09 Jun 2011, 14:27
Antispam: Yes

surface tension (Marangoni effect) driven 2-phase flows

Post by fmuldoo » 10 Jun 2011, 14:34

Hello all,

I am interested in the opinion of users and developers as to whether it
is practical to use Elmer for a two-phase flow problem with the Marangoni effect. In this case, the Marangoni effect arises from the linear dependence of the surface tension on temperature.

The interface between the two phases (liquid and gas) deforms only slightly. Indeed as a first attempt, this interface could be fixed, with
only the shear stress (including the Marangoni effect) and tangential velocity (normal
velocity being zero) and temperature and normal heat flux matched there.

Cheers,
Frank

raback
Site Admin
Posts: 3467
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: surface tension (Marangoni effect) driven 2-phase flows

Post by raback » 12 Jun 2011, 23:55

Hi

I would think that there is no problem that the surface tension is in an internal boundary. This doesn't of course mean that there couldn't be some other problems.

-Peter

Post Reply