Elastic wave

The graphical user interface of Elmer
Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 20 Apr 2017, 12:19

ok yes sure like i did with elmf90, ok thank you :)

Fouzi

Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 20 Apr 2017, 12:46

Hi,

I start see the annimation with paraview, but i don't have the propagation it's look like a local source???help please?

Fouzi
Attachments
local_source.PNG
local_source.PNG (100.91 KiB) Viewed 585 times

Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 21 Apr 2017, 12:28

Hi ,
i read this discussion:

http://elmerfem.org/forum/viewtopic.php ... 4d6#p13226

for the solvers method should i follow him or not:

Code: Select all

Solver 1

Linear System Solver = "Direct"
Linear System Direct Method = Umfpack
Steady State Convergence Tolerance = 1e-09
End
Fouzi

Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 25 Apr 2017, 18:07

Hi

some one can help me please?

Fouzi

mzenker
Posts: 1741
Joined: 07 Dec 2009, 11:49
Location: Germany

Re: Elastic wave

Post by mzenker » 26 Apr 2017, 11:29

Well, just try it and see what happens...

Matthias

Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 26 Apr 2017, 11:30

Hi,

I don't understund sorry, i try what?


Fouzi

Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 26 Apr 2017, 11:32

For the momment i suspect this part is wrong:

Code: Select all

Variable Coordinate 1, Coordinate 2, Time;  Real  MATC "if (tx(0)==0.4375&tx(1)==-0.15)sin(2*pi*20000*tx(2))*(tx(2)<=0.00005);else 0;"


Fouzi

mzenker
Posts: 1741
Joined: 07 Dec 2009, 11:49
Location: Germany

Re: Elastic wave

Post by mzenker » 26 Apr 2017, 11:41

Hi,

I intended to reply to your question whether or not you should use the settings proposed in the discussion you referred to in the previous post.
I don't know why your result is not what you expect. I don't have the time (and the mechanics knowledge) to check the physics of your problem and to verify if what you entered in the sif file really corresponds to what you think you have entered...
So I'm afraid you will have to check for yourself - the line of code you show seems to be a 20 kHz oscillation, is that correct?

Matthias

Fouzi
Posts: 55
Joined: 14 Mar 2017, 18:03
Antispam: Yes

Re: Elastic wave

Post by Fouzi » 26 Apr 2017, 12:02

yes 20khz

Fouzi

mzenker
Posts: 1741
Joined: 07 Dec 2009, 11:49
Location: Germany

Re: Elastic wave

Post by mzenker » 26 Apr 2017, 12:28

Hi,

this part of your MATC expression seems strange to me:

Code: Select all

sin(2*pi*20000*tx(2))*(tx(2)<=0.00005)
What if you included the (tx(2)<=0.00005) in the if() condition?
I would play with the MATC expression to see if it changes something...

HTH,

Matthias

Post Reply