Hi
Use rather VTU and Paraview.
-Peter
Elastic wave
Re: Elastic wave
Hi Peter,
I use this, and after documentation i use "warpbyvector" filter and modify the scale factore, but it doesn't work!
Fouzi
I use this, and after documentation i use "warpbyvector" filter and modify the scale factore, but it doesn't work!
Fouzi
Re: Elastic wave
Hi,
there is a ParaView mailing list where you can post your ParaView-related questions.
Matthias
there is a ParaView mailing list where you can post your ParaView-related questions.
Matthias
Re: Elastic wave
Hi,
you mean in this Forum or an other
you mean in this Forum or an other
Re: Elastic wave
Matthais,for the other simulation "with transit", i put all the configuration but it bug all time and ElmerGui close .
Fouzi
Fouzi
Re: Elastic wave
Hi,
if ElmerGUI keeps crashing, try to save the sif file, edit it manually if necessary and launch the solver from the command line.
Concerning your ParaView question:
ParaView is NOT part of Elmer. This is the Elmer forum. It may happen that incidentally you will get some ParaView-related hints here, since many Elmer users use ParaView for postprocessing. But the place to post questions concerning ParaView is the ParaView mailing list. The pointer to the list can be found on http://www.paraview.org.
Matthias
if ElmerGUI keeps crashing, try to save the sif file, edit it manually if necessary and launch the solver from the command line.
Concerning your ParaView question:
ParaView is NOT part of Elmer. This is the Elmer forum. It may happen that incidentally you will get some ParaView-related hints here, since many Elmer users use ParaView for postprocessing. But the place to post questions concerning ParaView is the ParaView mailing list. The pointer to the list can be found on http://www.paraview.org.
Matthias
Re: Elastic wave
Hi,
Can you give me an example how can i edit and launch the solver from the command line,
For Paraview now i suscribe to the forum, thank you very much.
Fouzi
Can you give me an example how can i edit and launch the solver from the command line,
For Paraview now i suscribe to the forum, thank you very much.
Fouzi
Re: Elastic wave
Hi,
go to your project directory and open the file case.sif with a text editor. Edit it if necessary.
Open a DOS box (or terminal if under Linux), cd to your project directory. Make sure that a file ELMERSOLVER_STARTINFO is present, containing
On the command line, type
ElmerSolver
and hit enter. The simulation should start.
HTH,
Matthias
go to your project directory and open the file case.sif with a text editor. Edit it if necessary.
Open a DOS box (or terminal if under Linux), cd to your project directory. Make sure that a file ELMERSOLVER_STARTINFO is present, containing
Code: Select all
case.sif
1
ElmerSolver
and hit enter. The simulation should start.
HTH,
Matthias
Re: Elastic wave
I did all this things, and obtain this :
- Attachments
-
- cmd.PNG (1.95 KiB) Viewed 4681 times
Re: Elastic wave
You have to make sure that ElmerSolver is in your PATH, or give the path of the executable, like
>C:\Programs\Elmer\ElmerSolver
or wherever your Elmer is installed.
HTH,
Matthias
>C:\Programs\Elmer\ElmerSolver
or wherever your Elmer is installed.
HTH,
Matthias