Plate 2D mesh

The graphical user interface of Elmer
Post Reply
AhmedER
Posts: 1
Joined: 13 Mar 2017, 12:20
Antispam: Yes

Plate 2D mesh

Post by AhmedER »

Hello

I'm trying to create a simple plate 2d mesh. I have created it using Gmsh and converted it using ElmerGrid. The mesh is attached and here is its picture.
2D_Mesh.png
2D_Mesh.png (20.54 KiB) Viewed 4029 times
2DPlate.tar.gz
(1.92 KiB) Downloaded 375 times
I have two problems.
First problem is that I cannot define the plate thickness. Please teach me how to define it.
Second problem is that I cannot define a pressure normal to the plate surface. Please teach me how to define this pressure.
Post Reply