Hello,
I am trying to simulate multi-body contact in Elmer. Is there any examples or references that are available as a case study?
Contact Mechanics in Elmer
-
- Site Admin
- Posts: 4826
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Contact Mechanics in Elmer
Hi
Contact mechanics is something that is currently under development. The target is to be able deal with cases where contact surface pairs are a priori known. Multibody contact are not yet planned, as far as I know.
-Peter
Contact mechanics is something that is currently under development. The target is to be able deal with cases where contact surface pairs are a priori known. Multibody contact are not yet planned, as far as I know.
-Peter
Re: Contact Mechanics in Elmer
Hi Peter,
If I understand, it is still not possible to perform this kind of analysis? :
https://www.youtube.com/watch?v=9FYTTLfHuxQ
When do you plan to release this feature ?
Thanks
Pierre
If I understand, it is still not possible to perform this kind of analysis? :
https://www.youtube.com/watch?v=9FYTTLfHuxQ
When do you plan to release this feature ?
Thanks
Pierre
-
- Site Admin
- Posts: 4826
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Contact Mechanics in Elmer
Hi Pierre,
Well, the animation was done with the public version. All contact mechanics code is immediately available at
https://github.com/ElmerCSC/elmerfem
There is a "contact" branch. Unfortunately documentation and test cases or lagging behind.
-Peter
Well, the animation was done with the public version. All contact mechanics code is immediately available at
https://github.com/ElmerCSC/elmerfem
There is a "contact" branch. Unfortunately documentation and test cases or lagging behind.
-Peter
Re: Contact Mechanics in Elmer
@Peter, I just can't find this contact branch you are talking about. I saw the video on youtube and it is a great place for me to start. I would appreciate if you could share the .sif and other files including geometry and mesh etc. thanks in advance.
-
- Site Admin
- Posts: 4826
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Contact Mechanics in Elmer
Hi
The "contact" branch has been long since merged with the "devel" branch.
-Peter
The "contact" branch has been long since merged with the "devel" branch.
-Peter
-
- Site Admin
- Posts: 4826
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Contact Mechanics in Elmer
Hi
There are some test cases for the contact named "Contact*". The animation on the youtube is closest to ContactBlunt2Dslide test case.
-Peter
There are some test cases for the contact named "Contact*". The animation on the youtube is closest to ContactBlunt2Dslide test case.
-Peter
Re: Contact Mechanics in Elmer
@Peter thanks a lot for your help. I think I found the test you referred to here:
https://github.com/ElmerCSC/elmerfem/tr ... unt2Dslide
https://github.com/ElmerCSC/elmerfem/tr ... unt2Dslide
Last edited by foadsf on 14 Feb 2017, 14:26, edited 2 times in total.
Re: Contact Mechanics in Elmer
Hi foadsf,
The tests Peter was referring at can be found here: https://github.com/ElmerCSC/elmerfem/tr ... /fem/tests
Yours Sincerely,
Anil Kunwar
The tests Peter was referring at can be found here: https://github.com/ElmerCSC/elmerfem/tr ... /fem/tests
Yours Sincerely,
Anil Kunwar
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice