Hello everybody,
I've come to the point that I have to solve and simulate fresnel equations and I'd wish I could do it using Elmer, do you guys have an idea on how to work on it? Is there a proper equation or solver on Elmer that allows me to do it?
Best wishes
Eletromagnetic Waves Simulation
Re: Eletromagnetic Waves Simulation
Hi,
since Fresnel's equations are derived from Maxwell's equations, you might open the models manual and seach for "Maxwell".
HTH,
Matthias
since Fresnel's equations are derived from Maxwell's equations, you might open the models manual and seach for "Maxwell".
HTH,
Matthias

 Site Admin
 Posts: 3443
 Joined: 22 Aug 2009, 11:57
 Antispam: Yes
 Location: Espoo, Finland
 Contact:
Re: Eletromagnetic Waves Simulation
Hi
Using Elmer just to solve Fresnel equations is not feasible since they are not PDEs. However, you could solve electromagnetic wave equations between different materials to analyze complex reflection/transmission boundaries. The refractive index, n, is associated to the relative permittivity, eps_r, and relative permeability, mu_r, by n=sqrt(eps_r*mu_r). And the EM wave can be solved by EMWaveSolver, see test cases EMWave*.
Peter
Using Elmer just to solve Fresnel equations is not feasible since they are not PDEs. However, you could solve electromagnetic wave equations between different materials to analyze complex reflection/transmission boundaries. The refractive index, n, is associated to the relative permittivity, eps_r, and relative permeability, mu_r, by n=sqrt(eps_r*mu_r). And the EM wave can be solved by EMWaveSolver, see test cases EMWave*.
Peter