Magnetic field induced by current in a cylindrical wire
-
- Site Admin
- Posts: 4823
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Magnetic field induced by current in a cylindrical wire
The sif file was not attached...
Re: Magnetic field induced by current in a cylindrical wire
Sorry. Please find the case.sif file attached.
- Attachments
-
- case.sif
- (4.75 KiB) Downloaded 204 times
Re: Magnetic field induced by current in a cylindrical wire
I am attempting to extract the max. joule heating. I ran my case.sif file. I get eddy current power and magnetic field strength along with max. magnetic flux density. How can I remove eddy current power and magnetic field strength from the results file?
results.txt.names:
Variables in columns of matrix: ./results.txt
1: max: joule heating e
2: res: eddy current power
3: res: magnetic field energy
Thanks for your time and consideration.
results.txt.names:
Variables in columns of matrix: ./results.txt
1: max: joule heating e
2: res: eddy current power
3: res: magnetic field energy
Thanks for your time and consideration.
- Attachments
-
- case.sif
- (4.71 KiB) Downloaded 225 times
Re: Magnetic field induced by current in a cylindrical wire
Hi,
you can explicitly indicate what is to be saved, see models manual "Result output...". Default is to save everything.
To put the keywords into the simulation section you can use "vtu:", see here: viewtopic.php?f=3&t=7019#p22388
HTH,
Matthias
you can explicitly indicate what is to be saved, see models manual "Result output...". Default is to save everything.
To put the keywords into the simulation section you can use "vtu:", see here: viewtopic.php?f=3&t=7019#p22388
HTH,
Matthias
Re: Magnetic field induced by current in a cylindrical wire
Adding -- Scalars Prefix = String "dummy:" -- as Peter had suggested worked. Thanks!