Hello
I want to use Elmer/ice to simulate a point or a cross-sectional view of a line as shown in Figure 1, as shown in Figure 1. First I set up a solver in the Sif file, as shown in Figure 2. Got Figure 3, what do I need to do next? Or what instructions can be entered in the terminal to get its cross-section?
xujiaxin
Elmer/ice performs sample problems
Elmer/ice performs sample problems
- Attachments
-
- 3.PNG (3.33 KiB) Viewed 5523 times
-
- 2.PNG
- (26.21 KiB) Not downloaded yet
-
- 1.PNG (543.04 KiB) Viewed 5523 times