Nernst-Planck electromigration

Numerical methods and mathematical models of Elmer
raback
Site Admin
Posts: 4812
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: Nernst-Planck electromigration

Post by raback »

Hi Adam,

Nice work indeed.

Thanx to mal you should be able to add attachments as well to the wiki.

-Peter
john quinn
Posts: 12
Joined: 28 Dec 2010, 23:45

Re: Nernst-Planck electromigration

Post by john quinn »

Hi All,

There are a lot of simularities in this model and a case I am working on. I noted patches to the advection diffusion solver for this applciation so I guess I am wondering if the correct .xml, .dll and .F90 files are available thus avoiding any work with compiling code.

John.
hazelsct
Posts: 153
Joined: 05 Oct 2009, 17:02
Location: Boston, MA, USA
Contact:

Re: Nernst-Planck electromigration

Post by hazelsct »

Hello John,

I added this patch on November 15, revision 4819, so anything more recent should have this feature.

-Adam
annier
Posts: 1168
Joined: 27 Aug 2013, 13:51
Antispam: Yes

Re: Nernst-Planck electromigration

Post by annier »

Hi Adam,
I tried to run the Np-case.sif for a similar geometry drawn in Salome 7.4.0. The ElmerSolver runs, but the result gives 0 concentration values both at anode(right edge i.e. curved surface length of the cylinder) and cathode(quarter circle i.e. hemisphere) as following:
concentration both shown 0 at anode and cathode
concentration both shown 0 at anode and cathode
electrochemistry.jpg (13.93 KiB) Viewed 2714 times
What should i do to solve this issue?
Thanking you.
Yours
Anil Kunwar
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Post Reply