Include material properties using .txt file

Numerical methods and mathematical models of Elmer
Post Reply
niranjan9ua
Posts: 15
Joined: 27 Jun 2018, 10:49
Antispam: Yes

Include material properties using .txt file

Post by niranjan9ua »

Hi,
I am doing PMSM motor simulation using ELMER but having difficulty in defining the material properties.

I want to define material properties using .txt file. I have got values of the BH curve (for iron). How can I use the data file (BH.txt) to define the BH curve of Iron.

Any suggestion/help most welcome. The .sif file and the BH.txt file is attached here.

See the material 2 in SIF file. if i run this file i get error "ERROR:: SectionContents: Problem reading real keyword: h-b curve: include bh.txt"
Attachments
case.sif
(7.13 KiB) Downloaded 305 times
BH.txt
(364 Bytes) Downloaded 299 times
Tom
Posts: 20
Joined: 20 Jan 2016, 12:46
Antispam: Yes

Re: Include material properties using .txt file

Post by Tom »

Hi niranjan9ua,

this link might help you.

Tom
niranjan9ua
Posts: 15
Joined: 27 Jun 2018, 10:49
Antispam: Yes

Re: Include material properties using .txt file

Post by niranjan9ua »

Hi Tom,

Thank you very much.
its working.
Post Reply