Is there a way to apply a mechanical torque over a body , just like the body force applies a force ?
Thanks
Apply a torque as body force
-
- Site Admin
- Posts: 4812
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Apply a torque as body force
Hi
Currenly not. There should be an automated way to define a surface force f such that
\int f dA = 0
\int f x r dA = M
So we have 6 equations. Any suggestion how to have a field with 6 coefficients so that the system would always have a solution? With a good recipe this should be maybe ~1 hour of coding.
-Peter
Currenly not. There should be an automated way to define a surface force f such that
\int f dA = 0
\int f x r dA = M
So we have 6 equations. Any suggestion how to have a field with 6 coefficients so that the system would always have a solution? With a good recipe this should be maybe ~1 hour of coding.
-Peter
Re: Apply a torque as body force
Thank you for your ptompt answer.
unfortunately I am not a coder at all!
Is it not possible to make a load as a moment on a surface ?
best regards
unfortunately I am not a coder at all!
Is it not possible to make a load as a moment on a surface ?
best regards