To whom it may concern
I have a question regarding the way I should use the priority icon in the equation part. I want to add temperature and heat flux parameters and get the velocity and pressure parameters. But the problem is that the Navier equation doesn't work. I think that it may because of the execution order of the solvers. I was wondering if you let me how I can run the simulation that heat equation first solver and Navier equation second solver?
Sincerely,
Armaghan
Order of Solver Execution for Coupled Solvers
-
- Posts: 26
- Joined: 28 Jul 2020, 11:24
- Antispam: Yes
-
- Site Admin
- Posts: 4823
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Order of Solver Execution for Coupled Solvers
Hi
In ElmerGUI the numbering of Solvers (aka modules) may be determined by the priority. Give a higher priority to the Solver you want to solve first (bigger number).
-Peter
In ElmerGUI the numbering of Solvers (aka modules) may be determined by the priority. Give a higher priority to the Solver you want to solve first (bigger number).
-Peter
-
- Posts: 26
- Joined: 28 Jul 2020, 11:24
- Antispam: Yes
Re: Order of Solver Execution for Coupled Solvers
Hi Peter.
Thank you for your response. I did the same and put number 2 in priority item for the Heat equation and number 1 for the Navier equation. But it didn't work. What should I do now?
Sincerely,
Armaghan
Thank you for your response. I did the same and put number 2 in priority item for the Heat equation and number 1 for the Navier equation. But it didn't work. What should I do now?
Sincerely,
Armaghan