Elmer Install on Windows 10 not working

Discussion about building and installing Elmer
sameer21101970
Posts: 27
Joined: 24 Jul 2019, 08:14
Antispam: Yes

Re: Elmer Install on Windows 10 not working

Post by sameer21101970 » 17 Sep 2019, 10:51

End
Last edited by sameer21101970 on 30 Sep 2019, 15:04, edited 1 time in total.

raback
Site Admin
Posts: 3464
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: Elmer Install on Windows 10 not working

Post by raback » 17 Sep 2019, 17:40

Hi

Your picture makes me wonder whether you're still on the linear regime. What if you reduce the load significantly. Now your result looks very distorted.

You would like to click the load in with the mouse. That would of course be convenient. Unfortunately Elmer is a project mostly driven by projects that are often on the bleeding edge whereas there are no projects related to the GUI development. The business logic for creating nice user interfaces is more difficult with the open source model.

-Peter

sameer21101970
Posts: 27
Joined: 24 Jul 2019, 08:14
Antispam: Yes

Re: Elmer Install on Windows 10 not working

Post by sameer21101970 » 19 Sep 2019, 11:03

Elmer is doing very good work on open platform, we need to give the elmer team feedback on what as a user we want to make the solver simple to use.
I hv tried linear analysis and very much happy with Equaltions Capability to handle high Pressure data.
But would request ElmerTeam to give Control on Defination / Location of Load by Coordinates (x,y,z) so that exact load point/node can be defined/applied.

Some of the Rows in Boundary Condition in Nonlinear are not having any explanation like,

Nodal loads
Displacement Periodics

Hope elmer team is reading all this stuff.

sameer21101970
Posts: 27
Joined: 24 Jul 2019, 08:14
Antispam: Yes

Re: Elmer Install on Windows 10 not working

Post by sameer21101970 » 20 Sep 2019, 10:53

Dear Peter

I have read your elmerposts way back since 2012. You can Guide new users on How to Learn MATC.
It is Matlab or combination of Fortran & Matlab.
8 page MATC Manual is not sufficient to learn it for Non-Software Engineer.

For example i want to define by MATC simple stress=Force/area equation at Element and much more. But Proper Material is require to fully utilize Power of Elmer.
Kindly Reply and Guide.
raback wrote:
17 Sep 2019, 17:40
Hi

Your picture makes me wonder whether you're still on the linear regime. What if you reduce the load significantly. Now your result looks very distorted.

You would like to click the load in with the mouse. That would of course be convenient. Unfortunately Elmer is a project mostly driven by projects that are often on the bleeding edge whereas there are no projects related to the GUI development. The business logic for creating nice user interfaces is more difficult with the open source model.

-Peter

Post Reply