Simpel one end fixed beam force in other end

Discussion about building and installing Elmer
Oldbelt
Posts: 11
Joined: 24 Dec 2018, 14:15
Antispam: Yes

Re: Simpel one end fixed beam force in other end

Post by Oldbelt »

Hi Matthis.
I f you look at MySif file you can see the scaling 0.001 and the Picture: My Beam.jpeg
show the dimensions is m.
The figures is wrong the correct is 0.065 m or if the scaling is missing 65 mm or 6.5 cm.

Kr. Oldbelt.
mzenker
Posts: 1999
Joined: 07 Dec 2009, 11:49
Location: Germany

Re: Simpel one end fixed beam force in other end

Post by mzenker »

Ok, I had understood that your sif files were exactly identical. There is also a difference in the boundary contidions. Did you check that the numbering in your beam and the tutorial beam differ accordingly? If not, the force would be applied to a different side of the beam, changing the result.
You can also try if the result changes with a finer mesh.

HTH,
Matthias
Post Reply